Completely refurbished semi-automated edge polisher. In perfect conditions.
The AM-2 model is equipped with standard equipment allowing flat surfaces to be polished at 90º.
The machine operating system is based on a cycle in which the moving head of the cutter runs along a working table on which parts have been secured previously by pneumatic hold down clamps spread out along the table. These clamps can work on parts at different heights during the same operation.
The polishing head is equipped with a rear regulator used to adjust the depth of the run with a high degree of accuracy, to the nearest hundredth.
In order to align the parts with the cutter, the table is equipped with a special screen, which is lowered before the cycle begins. Once the parts have been adjusted, the clamps go down, the screen retracts and the automatic machine cycle starts.
TECHNICAL SPECIFICATIONS:
The main mechanical specifications of the AM-2 model are as follows:
- AM2 dimensions 000 mm x 1.350 mm x 1.330 mm
- Working length 400 mm
- Maximum thickness 90 mm
- Cut depth from 0.05 / 5 mm
- Variable feed speed from 0 to 3.5 m/min
- Total installed power 2 kW
- Feed power 1 HP / 0.75 kW
- Standard number of clamps 5 clamps
- Air pressure 6 Kg./cm2
- Suction diameter 100 mm
- Weight 900 kg
- Weight with packing 100 kg
- Packing dimensions 260 mm x 1.354 mm x 1.587 mm
- Front safety protection: polycarbonate transparent cover
- Machine colour RAL 7040
Applications:
- Polishing of methacrylate displays
- Displays for cosmetics, etc.
- Methacrylate decorative elements
- Elements for stands
- Gift objects and costume jewelry
