Professional acrylic bending machine HRP/S made of robust construction with pneumatically controlled cover and adjustable stop. Equipped with millimeter/inch calibrated scale. The temperature of the heating elements is adjustable.
The reflectors are easily adjusted in relation to each other from 25 to 1000 mm (between centres). It is possible to bend sheets from 0.03 -1 mm or up to 15 mm by adding special bending profiles or 2-resistor reflectors.
BENDING MACHINE HRP/S 220
| Resistencia inferior | Resistencia superior | Reguladores temperatura | Barras sujeción |
|---|---|---|---|
| 1 | 1 | 2 | 1 |
| 2 | 1 | 3 | 1 |
| 2 | 2 | 4 | 2 |
| 4 | 2 | 4 | 2 |
Heating: Lower and upper
Standard film thickness: 1 – 12 mm.
Maximum sheet thickness: 20 mm.
Minimum thickness: 0.3 mm
Distance between reflectors: 20 – 1,000 mm.
Adjustable clamping bars: see composition
Weight: 470 kg.
Connection voltage: 220 – 230 Volt.
BENDING MACHINE HRP/S 300
| Resistencia inferior | Resistencia superior | Reguladores temperatura | Barras sujeción |
|---|---|---|---|
| 1 | 1 | 2 | 1 |
| 2 | 1 | 3 | 1 |
| 2 | 2 | 4 | 2 |
| 4 | 2 | 4 | 2 |
Length: 300 cm.
Heating: Lower and upper
Standard film thickness: 1 – 12 mm.
Maximum sheet thickness: 20 mm.
Minimum thickness: 0.3 mm
Distance between reflectors: 20 – 1,000 mm.
Adjustable clamping bars: see composition
Weight: 570 kg.
Connection voltage: 220 – 230 Volt.
Bending acrylic has always been challenging to achieve consistent finished products in limited time. With Shannon bending machines, this task becomes simpler, because of the multiple operations for large quantity of jobs.
Check the technical characteristics of the acrylic bending machine Shannon HRP/S and you’ll see the practices and capabilities that this machine could offer to your company.
Also, have a look at the range of accessories you could use to adapt the bender to your needs and requirements. Customise the acrylic bender according to your needs and improve your production process.
