Acrylic bending machine HRT
The acrylic bending machine HRT is equipped with a side stop and a calibrated scale in millimeters/inches. Both the temperature and the working height of the heating element are adjustable. Depending on the length, the reflectors are easily adjusted relative to each other from 20 to 800 mm (between centers).
See the range of accessories for special tools, lower support structures, and special bending profiles. Get the better tools for the better acrylic line bending machine.
| Lower resistance | Temperature controllers |
|---|---|
| 1 | 1 simple |
| 2 | 2 simple |
| 3 | 3 simple |
| 4 | 4 simple |
| 2 | 1 double |
| 4 | 2 doubles |
BENDING MACHINE HRT 65
Heating: lower
Minimum thickness: 0.3 mm
Suitable for: 0.4 – 6 mm
Distance between reflectors: 15 – 510 mm
Weight: 70 kg.
Connection voltage: 220 – 230 Volt..
BENDING MACHINE HRT 125
Heating: lower
Minimum thickness: 0.3 mm
Suitable for: 0.4 – 6 mm
Distance between reflectors: 15 – 620 mm
Weight: 90 kg.
Connection voltage: 220 – 230 Volt.
BENDING MACHINE HRT 220
Heating: lower
Minimum thickness: 0.3 mm
Suitable for: 1 – 10 mm
Distance between reflectors: 20 – 860 mm
Weight: 125 kg.
Connection voltage: 220 – 230 Volt.
BENDING MACHINE HRT 300
Heating: lower
Minimum thickness: 0.3 mm
Suitable for: 1 – 10 mm
Distance between reflectors: 20 – 860 mm
Weight: 175 kg.
Connection voltage: 220 – 230 Volt.
This acrylic bender is equipped with side stop. Both the temperature and the working height of the heating element are adjustable. The plastic bender Shannon HRT is specially indicated for folder very thin sheets, a special bending profile can be fitted (see accessories).
Check the technical characteristics of the acrylic bender HRT and you’ll see the practices and capabilities that this machine could offer to your company. Also, have a look at the range of accessories you could use to adapt the bender to your needs.
